● To create a raised, glossy surface that adds a luxurious touch to your work, use ink suitable for embossing or write with an emboss pen, then sprinkle embossing powder over the stamped or written area and heat it.● Use clear powder with colored ink.● Opaque powder can be used with any ink, but we recommend using a dedicated EMBOSS stamp pad, a clear EMBOSS pen, or VersaMark (see page 37)● Apply the powder liberally, then brush off any excess powder that remains on areas other than the stamped image and return it to the bottle.● We recommend using a heat gun, but you can also use a hot plate with aluminum foil (be careful not to get powder on the plate) or oven toaster.● Be careful not to burn yourself during the process. Embossing cannot be done on fabric, and a hair dryer cannot be used for embossing.秒20-3036ClearThis is an embossing stamp pad designed for use with opaque embossing powder. The ink is tinted with a faint pink color to improve visibility.ClearThe finished surface has a raised, glossy appearance, providing an easy and luxurious finish.UsageCardstock Glossy paper (coated paper)Tracing vellum paperTintedTintedDrying timeApply heat until the powder melts (using an heat gun for about 20-30 seconds). Note that the heating time may vary depending on the amount of powder used and the equipment used.EM-57Real BlackEM2-57Real BlackPlease store horizontal-ly. Storing vertically may cause the ink to not come out properly.EM-81ClearEM2-81ClearTWIN TIPSCalligraphynibFine Point nibEMBOSS PenEM-＊＊● 2 colors● φ12×W171mmEMBOSS Pen ⅡEM2--＊＊● 2 colors● φ12×W171mmEMBOSSING STAMP PADInkerSEMR-C● 1 colors● φ24×H66mm ● capacity 15mlEMBOSSING STAMP PADSEM-C● 1 colors● W99×D68×H19mm● pad size 76×47mmEMBOSSING STAMP PADSEM-T● 1 colors● W99×D68×H19mm● pad size 76×47mmEMBOSSING STAMP PADInkerSEMR-T● 1 colors● φ24×H66mm ● capacity 15ml
元のページ ../index.html#36