ECAFRUSYREVE ROF3-5dMnOzātSnOzātSTNEMGPnOzātSeuqapOnOzātSCILLATEMnOzātS ii I ❶❷❸ 9❷ ❸秒分Metal, plastic transparency (clear sheet), shrink plastic, polyethylene vinyl, rubber, leather, polymer clay, laminated paper, glossy paper (coated paper), regular paper & cardstock, non-coated paper, photo paper, glass, ceramics, pottery (terracotta), painted surfaces, and fabric.InkerDrying time varies from 3 sec. to 5 minutes depending on material and climate.GoldSilverCopperPlatinumThis is an all-purpose metallic ink pad that can be used on most materials, including those that do not absorb ink.UsageDrying timeColorRZ-000-191RZ-000-192RZ-000-193RZ-000-195SZ-000-191GoldSZ-000-192SilverSZ-000-193CopperSZ-000-195Platinum ❶ Shake the ink well and drip 5-8 drops onto one side of the pad. Then, spread the ink horizontally with the included squeegee. Be careful not to leave any ink on the back of the squeegee. Since this pad does not absorb ink, be careful not to apply too much ink.Adjust the amount of ink according to the size of the stamp. If the impression becomes light, refill the ink as needed.After use, clean the stamp with StazOn cleaner as soon as possible.StāzOn METALLICSZ-000-＊＊＊● 4 colors● package size 138×D70×H20mm● pad size 76×47mm● This is an ink and pad set. The pad is not filled with ink at the time of shipment.● Might be slippery on a slick surface.● If needed, StazOn cleaner can be used to remove it from non-absorbent surfaces.● After use, be sure to remove the ink with StazOn cleaner as soon as possible and then rinse with water.● Clear (photo polymar) stamps may deteriorate depend-ing on the material.● The opacity may slightly decrease with materials that absorb.● To prevent drying, cover immediately after use.StāzOn CleanerSZL-56● φ36×H100mm ● capacity 56ml StāzOn METALLICInkerRZ-000-＊＊＊● 4 colors● W37×D19×H67mm● capacity 15ml
元のページ ../index.html#9