Products Information
 |
●On initial use, apply glue (a drop with a diameter of approximately 3 cms) to pad surface and work into pad with nozzle of bottle. |
|---|---|
 |
●Stamp image with Essential Glue Pad. |
 |
●Apply lamé to stamped image and allow the glue to dry.Gently remove excess powder. |
 |
●Apply gold leaf to stamped image with tweezers. Gently remove extra leafing with a brush. |
| Application | Coated paper, uncoated paper |
|---|---|
| Drying time | Up to 15 minutes on uncoated papers and 60 minutes on coated papers. Varies based on surface, humidity, etc. |
| Embossing | Not recommended for embossing. |
- For embellishing your stamped designs with foils, lamé, powders and (fine grain) glitter.
- Dries clear.
- No heat required!
- Allow images and embellished on non-porous surfaces to dry for 2 to 3 days. Heat resistant materials may be heat set to speed drying time.
- For foiling, apply foil when glue is partially dry. Place sheet of foil onto desired image and press down lightly with hands. Remove excess foil gently with a brush.
- Foils adhere best to glue on coated papers.
- Test before use to ensure selected medium will adhere to the glue.
- Use fine grade lamé (larger grains may rub off.)
- If glue dries on pad, wash off the dried glue and allow pad to dry. Re-ink pad with Glue Pad inker.
- Replace inner plastic cover and cover after use. Exposure to air will cause the glue pad to dry out.
- Only re-ink the pad with the Essential Glue Pad inker.
(1)Glue Pad
GP-002
(2)Glue Pad Inker 15ml
RP-002